Enduit carrelage pour mur et sol – renove carrelage – Choice of colors and packaging Arcane industries

RENOVE CARRELAGE is a single-component coating for walls and floors, ideal for renovation. Highly adhesive, it is easy to apply directly onto your tiles, without the need for a primer. It is suitable for both wet rooms, such as bathrooms, and dry rooms.

RENOVE CARRELAGE contains :
Neutral powder
Pigment dose
How do I protect RENOVE CARRELAGE?

As with all coatings, it’s essential to protect with a pore filler and HIGHPROTECT varnish for greater resistance to water and stains. ESSENTIAL IN BATHROOMS AND KITCHENS

Available in 2m² (4kg) 5m² (10kg) 10m² (20kg)

ADVANTAGES OF RENOVE CARRELAGE
Quick and easy to use, the product can be diluted with water.
Pure product! No need to buy a paste coating with a high water content.
Thicker formula
When you buy 10kg of powder, you get 13kg of paste.
No need for primer, direct application to tiles
Open time > 1h
Excellent adhesion to tiles, cement tiles, marble, travertine, etc.
Creamy consistency for easy application without traces of rework,
Very smooth finish
Odorless,
Clean tools with water.

RENOVE CARRELAGE has been made in France at our Arcane Industries factory since 1995, a guarantee of quality, reliability and resistance. Our mineral coating is recommended by many building professionals, architects, interior designers, home stagers, etc.

4kg of powder yields 5.2kg of paste or 2.6m² in 2 coats
10kg of powder yields 13kg of paste or 6.5m² for 2 coats
With 20kg of powder, you can make 26kg of paste, i.e. 13m² for 2 coats.

Price from 3.69€/m² per coat

KEY POINTS RENOVE CARRELAGE PRODUCTS
COMPETITORS
Application without primer V X
Long open time > 1H V X
Excellent opacity and coverage V X
Excellent joint coverage V X
Easy mixing V X
All tiles, even smooth V X
Excellent adhesion V X
Powder (not a ready-to-use paste coating
) advantage = when you buy 10kg powder
= 13kg paste V X
Thickened formula specially adapted for
tiles V X
Clean tools with water V V
Easy maintenance V V

WHERE TO APPLY RENOVE CARRELAGE?

RENOVE CARRELAGE can be applied to cover your interior tiles:

All types of tile, glazed stoneware, cement tiles, marble, travertine, terracotta…
Bathrooms (floors, vanity tops, showers),
Kitchens (worktops, credenzas, floors)
Furniture
Living room, corridors, bedrooms, stairs…

For a protective finish, apply a pore filler and HIGHPROTECT varnish.

Renove Carrelage can also be applied to :
– Cement.
– Plasterboard (BA 13).
– Gypsum and plasterboard.
– Light / cellular concrete.
– Wood surfaces: medium, water-resistant chipboard (CTBX), marine plywood, laminates.

Available in 14 colors and 3 packaging options, in the form of a bucket of neutral powder with a sachet of pre-dosed pigments.

Application
Substrate preparation :
The substrate must be resistant, non-friable, stable and cohesive.
Surface must be dry.
Remove old paint, plaster and putty by scraping and, if necessary, sanding. Remove all traces of silicone sealant. All irregularities must be removed.
for application in a shower, special preparation is required to reinforce waterproofing and wall/floor junctions. (please consult us).
Material preparation :
TIP: As the opening time of the product averages 1h30, we strongly advise you to mix and prepare the mixture by 5kg maximum, otherwise your mixture will harden before you have finished your application.

Pour all the pigment into the powder to obtain the chosen shade, then mix dry under mechanical agitation until the powder is completely colored. For a uniform color, it is preferable to sift the pigment. Prepare 3 liters of water for 10 kg of powder, i.e. 300 ml (300 g) of water for 1 kg of powder.

Preparing the mixture: pour the colored powder into the water by hand or mechanical stirring at slow speed until a homogeneous paste is obtained. Always pour the powder into the water, not the other way round (risk of lumps). The final mixture should be thick.

Proceed in the same way for your 2nd coat and then also for any 3rd coat.

Application:

On prepared substrates, apply an even, 1 mm-thick first coat using a stainless steel trowel.

After the 1st coat has dried completely, about 5 hours later but with no time limit, cover with a 2nd even coat that can be applied as it dries, depending on the desired effect.

It is sometimes necessary to apply further coats to obtain a smoother film, especially if the spectrum of joints is still visible, or if they are very hollow.

After 12 hours drying time, polish with n°120 sandpaper, either manually or using an orbital sander. Then apply the pore filler. Allow to dry for at least 12 hours. Then cover with our Highprotect varnish.

When applying to dissimilar substrates (e.g. two edge-to-edge worktops or two panels of medium wood, fibrocement etc.), it is essential to join the substrates together using a strip of tarlatan calico embedded in our universal primer before applying the decorative coating.

If applying to solid wood, we recommend insulating the wood against rising tannins before applying the coating with 2 coats of our High Protect varnish to avoid unsightly colored stains through the coating.

Finishing:

To protect the plaster :

Application of one coat of Pore Filler (12 h drying time)
Application of 2 coats of Highprotect professional polyurethane varnish (12 h drying time between coats).

The type of finish used will depend on the location of the surface being treated and the constraints inherent in its use. It will also depend on the desired finish (matt or satin).

Drying / Tools / Cleaning :
Drying between 2 coats: approx. 5 hours
Drying before polishing and finishing: 12 hours or more
Open time > 1 hour
American knife in various sizes (useful for corners, credenzas, stairs, small surfaces not accessible with the smoothing tool)
Plastic and stainless steel smoothers 20×8 and 24×10 with rounded edges. Important: the size and type of smoother must be adapted to the surface. If the smoother has already been used, rub its edges with sandpaper to remove roughness and avoid marking the surface.
Microfiber rollers (10mm – 250mm): for finishing applications.
Clean with water during and after use

Entretien

• Attendre 7 jours de séchage avant d’utiliser un détergent pour l’entretien courant.

Consommation

Rendement de 2kg/m² pour les 2 couches

1ère couche : 1,2 kg de mortier poudre / m²
2ème couche : 0.8 kg de mortier poudre / m².

Le rendement total poudre + eau ne doit pas être inférieur à 2.5 kg de mortier poudre / m².

Si vos joints sont très creux (supérieur à 3mm) nous vous conseillons soit d’appliquer une 3ème couche à raison 1kg/m² afin de supprimer complètement le spectre visuel soit appliquer en 1ère couche notre ragréage RAGREPLUS.

• 4 kg  de poudre + 1.2 kg d’eau = 5.2 kg de pâte reconstituée permet de recouvrir jusqu’à 2,6 m² pour 2 couches.
• 10 kg  de poudre + 3 kg d’eau = 13 kg de pâte reconstituée permet de recouvrir jusqu’à 6.5 m² pour 2 couches.
• 20 kg  de poudre + 6 kg d’eau = 26 kg de pâte reconstituée permet de recouvrir jusqu’à 13 m² pour 2 couches.